MedMart header requires Macromedia Flash. Get Macromedia Flash.

Orion LU/LA Commercial Elevator

Orion is a fully enclosed commercial elevator that makes code compliance fast and easy. Completely redesigned, it meets all current American and Canadian Code requirements for limited-use/ limited application (LU/LA) elevators. It is also suitable for residential use.

Our innovative system delivers reliable, quiet, and smooth operation while serving two to four floors. Orion can be personalized to complement any décor. It is a user-friendly, cost-effective solution for both new construction, and when adding an elevator to an existing structure. Easily installed, the Orion can be applied to nearly any low-rise application.

Standard Equipment:
  • Elastomeric Bumpers
  • Magnetic Floor Selection, Stopping and Re-leveling
  • Final Upper Limit
  • Pit Prop
  • Car Top Prop (When Required)
  • Over-Speed Governor
  • Car Top Inspection Station
  • Negative Pressure Switch
  • Variable Speed, Pressure Compensated Proportional Valve
  • Submersed Motor
  • 16' Rail Sections
  • Final Drawings Included With Confirmed Order
  • Operating Instruction Labels
  • Anchors For Hoistway Construction
Safety Features:
  • Slack Rope Safeties that instantly lock the elevator onto the rails the moment any lifting cable loses tension
  • Negative Pressure Module valve prevents car movement if hydraulic pressure is lost
  • Backup Lighting powered by emergency battery
  • Flow Control Valve to prevent over-speed in the down direction
  • Interlocks Provided, which maintain the door in the closed and locked position before elevator can move
  • Light Curtain standard when 2 speed doors ordered to ensure passenger safety.
Optional Equipment:
  • 8' Rail Sections
  • Hose 15' (With Flow Control Valve)
  • Hose 20' (With Flow Control Valve)
  • Hose 25' (With Flow Control Valve)
  • Flow Control Valve Only
  • Pipe Rupture Valve
  • Lag Bolts
  • Through Bolts
  • Concrete Anchors
  • Data Access Terminal (DAT) (Required for Installation & Maintenance)
  • Dupline Programming Tool (Required for Maintenance)
  • Temporary Run Button (Required for Installation)
  • Conductor Cable For Hoistway to Pump Wiring
Specifications:

Rated Load: 1,400 lbs. (635 kg.)

Rated Speed: 30 fpm (0.15 m/s)

Car Dimensions: 48  W x 54  L Depth (1220 mm x 1372 mm)

Operation: Single Automatic Push Button

Power Supply: 220-Volt, Single Phase, 60 Amp or 208-Volt, 3 Phase, 30Amp.

Travel Distance: 25 feet (7.6 m) maximum as per ASME A17.1 Part 25
NOTE: Elevator can travel up to 30 feet (9.1 m)

Levels Served: Maximum 4

Number of Openings: Maximum 2

Lighting Supply: 110-Volt, Single Phase, 60 cycle, 15 amps

Door Opening: 36  x 6  8  (890 x 2030 mm) Nominal

Jack Type: 1:2 cable hydraulic

Pump Type: Submersible with Variable Speed Valve

Hoistway Door/Cab Door: 2-Speed Horizontal Sliding Hoistway Door with 2-Speed

Horizontal Sliding Cab Door: 1:2 cable hydraulic

Car Controller Type: Magnetic Sensor

Leveling Device Type: Magnetic Sensor
back to elevators